Grappling with another project

Here we discuss projects and post pictures of projects

Moderator: Fawteen

melvinhatcher
Posts: 5
Joined: Fri Nov 10, 2017 8:32 am

Re: Grappling with another project

Postby melvinhatcher » Sat Dec 16, 2017 11:08 am

Good morning Fawteen,
Thank you for the complement, however I am sincerely grateful to you and a few other various tractor forums. As for the third function valve, it is connected to the loader valve and was installed by the dealer when I purchased the tractor new. As for the bracket, it was installed by the dealer also, to hold the hose connectors for my snowplow. Therefore, my installation went fairly simple after I drilled the holes in the bucket.
Image
Bracket mounting on my tractor.
Image
Image
Image
Image
Image
Straight fittings on hoses on my tractor.
Image
90-dgree fittings on hoses.
This is not a picture of my tractor, but is an example of a hose arrangement that I am considering.
However, the 90-degree fittings at the quick connect was needed due to the length of his hoses.
For the moment I think I will stick with my hose configuration until I put it actual use.

User avatar
Fawteen
Moderator
Posts: 1126
Joined: Tue Dec 07, 2004 8:28 pm
Location: East Overshoe, Maine
Contact:

Re: Grappling with another project

Postby Fawteen » Sat Dec 16, 2017 12:42 pm

Thanks for the pictures of the bracket mount. I'll have to check and see if I can do something similar. I just have the hoses zip-tied to the crossmember at the moment, not ideal.
What do you mean I can't do that?

User avatar
Grove r
Posts: 837
Joined: Wed Dec 08, 2004 8:30 am
Location: Rocky Mountain House, Alberta, Canada

Re: Grappling with another project

Postby Grove r » Sat Dec 16, 2017 4:23 pm

Excelent, as usual PF, like your way of doing things. A gripple is sooooooo handy when handling stuff.

have a good one,
Ron.E.


Return to “Shop Projects”

Who is online

Users browsing this forum: No registered users and 1 guest